Care and Maintenance

To remove dust after installation and for initial
cleaning, use a soft, lint-free cotton cloth to wipe
down all exterior and interior surfaces.
For regular basic cleaning, use a soft, lint-free cotton
cloth dampened with a mild detergent or soap, and
warm water. For best result, use a “blotting” action
rather than a wiping motion when cleaning.
Wipe up food spills and water spots immediately with
a lint-free cotton cloth, so moisture is not absorbed
into the cabinet surfaces.

When in doubt of a cleaner’s suitability, do not use.
Never use scouring pads, steel wool, wire brushes or
powdered cleaners.
Never leave a cloth moistened with cleaner on any
cabinet surface for any length of time.
Check the areas around the sink and dishwasher to
make sure that water and detergents to not dry on
cabinet surfaces.
Avoid draping wet or damp dish towels over doors of
the base cabinets.
Do not attach towel racks to the interior of the cabinet
doors.
Avoid placing small kitchen appliances where the
heat or steam is directed onto cabinet surfaces.
Do not leave printed materials (newspapers,
magazines, etc.) on the cabinet surfaces, as the
printing ink can bleed into the cabinet finish.